 |
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
 |
|
|
||||
 |
Aug 28 10:44pm PDT |
|
||||||
 |
|
|||||||
 |
HOME | Login | New user? Register | Help |
 |
|
|||
|
|
|
Don't know what openCortex is? Learn about it. |
|
|
|
|||
|
|
|
|
|
|
|
|
 |
Home » Shell/Array Support » B2B shell layup18 |
 |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PARENT CATEGORY Shell/Array Support |
|
|
|
||
|
|
||||||||
|
LINKED PROFILES |
IMAGE
B2B shell layup18 OCID cn00000284 |
LINKED CATEGORIES Shell/Array Support |
||||||
|
|
||||||||
| LINKED CONTENT |
|
|
|
|
|
|
|
|
 |
 |
Link to... |
|
|||
 |
||||||
|
 |
+Article | +Photo |
 |
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
B2B shell layup18 Photo by eloy avila created 5/7/2003 submitted 5/7/2003 06:40:36 PM The top shell layup of the Back2Back Burner. The core is ready to go and next is another layer of carbon and the bagging process. Top Shell Layup15.JPG | 800 x 600 | image/pjpeg | jasari
|
|
|
|
|
|
|
|
||||
| Related Content (0) | ||||
|
||||
| B2B shell layup16 Photo by eloy avila submitted 5/7/2003 The top shell of the Back2Back Burner was made from carbon and in this instance we used release film carefully taped to the mold since any minor wrinkles on the finished shell would be covered by solar cells. This meant we did not have to cure a release agent on the molds beforehand. | |
|
|
|
 |
||||
| B2B shell layup19 Photo by eloy avila submitted 5/7/2003 Top shell of the Back2Back Burner after it is taken out of the mold. Kapton polyamide film was used in the layup to provide an insulating layer on the carbon surface where solar cells will go. | |
|
|
|
|
||||
|
|
||||
|
Help | About openCortex | Privacy | Partners © 2002-2008 openCortex, LLC. All Rights Reserved. |
||||