 |
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
 |
|
|
||||
 |
May 16 6:23am PDT |
|
||||||
 |
|
|||||||
 |
HOME | Login | New user? Register | Help |
 |
|
|||
|
|
|
Don't know what openCortex is? Learn about it. |
|
|
|
|||
|
|
|
|
|
|
|
|
 |
Home » Mold Sanding » Mold Bag test |
 |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PARENT CONTENT Mold Sanding |
|
|
|
||
|
|
||||||||
|
LINKED PROFILES Back2Back Burner |
IMAGE
Mold Bag test OCID cn00000224 |
LINKED CATEGORIES |
||||||
|
|
||||||||
| LINKED CONTENT |
|
|
|
|
|
|
|
|
 |
 |
Link to... |
|
|||
 |
||||||
|
 |
+Article | +Photo |
 |
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
Mold Bag test Photo by eloy avila created 11/17/2002 submitted 11/17/2002 06:43:26 AM After the mold is finished/sanded and cleaned we tested the bagging process and vaccuum on the mold. This helps to eliminate any surprises. We also had some experts from Lockheed (thanks) on hand to help out with suggestions. Mold Bag31.JPG | 800 x 600 | image/pjpeg | jasari
|
|
|
|
|
|
|
|
||||
| Related Content (1) | ||||
|
||||
| Mold Sanding Photo by eloy avila created 11/17/2002 submitted 11/17/2002 06:33:10 AM Here is an intermediate sanding step between coats of primer sealer. We used 150 grit at first and the last few steps were 400 grit and up. A final wet sanding was done to finish it off. | |
|
|
|
 |
||||
| Mold Oven test Photo by eloy avila submitted 11/17/2002 In order to do a layup with prepreg we needed a large oven to heat the molds/layup in. We constructed a modular oven that could be dismatled and moved easily. The oven is fiberglass insulation at a suitable thickness reinforced by wire mesh and held on 2x4 studs. | |
|
|
|
|
||||
© 2002-2008 openCortex, LLC. All Rights Reserved.