 |
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
 |
|
|
||||
 |
Aug 28 6:34am PDT |
|
||||||
 |
|
|||||||
 |
HOME | Login | New user? Register | Help |
 |
|
|||
|
|
|
Don't know what openCortex is? Learn about it. |
|
|
|
|||
|
|
|
|
|
|
|
|
 |
Home » test composite panel-breather » test composite panel-breather |
 |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PARENT CONTENT test composite panel-... |
|
|
|
||
|
|
||||||||
|
LINKED PROFILES |
IMAGE
test composite panel-breather OCID cn00000176 |
LINKED CATEGORIES Composite Shell Mater... Composite Shell Mater... |
||||||
|
|
||||||||
| LINKED CONTENT |
|
|
|
|
|
|
|
|
 |
 |
Link to... |
|
|||
 |
||||||
|
 |
+Article | +Photo |
 |
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
test composite panel-breather Photo by eloy avila created 6/26/2002 submitted 7/6/2002 09:36:19 PM Here a layer of breather is applied over the peel ply before being trimmed to fit. This allows for air to evacuate and soaks up excess epoxy. It should be cut about an inch away from the vaccum bag tape. breather2.jpg | 800 x 600 | image/pjpeg | jasari
|
|
|
|
|
|
|
|
||||
| Related Content (5) | ||||
|
||||
| test composite panel-breather Photo by eloy avila created 6/26/2002 submitted 7/6/2002 09:32:39 PM Here a layer of peel ply is placed on top of the test panel. This helps to create a surface for later bonding and allows excess epoxy to seep out of the carbon. | |
|
|
|
 |
||||
| test composite panel-breather Photo by eloy avila created 6/26/2002 submitted 7/6/2002 09:36:19 PM Here a layer of breather is applied over the peel ply before being trimmed to fit. This allows for air to evacuate and soaks up excess epoxy. It should be cut about an inch away from the vaccum bag tape. | |
|
|
|
|
||||
| test composite panel-vac bag Photo by eloy avila created 6/26/2002 submitted 7/6/2002 09:39:56 PM Here vacuum bag has been placed to cover the enire panel and overhang on the vacumm tape. The seals should be checked for leaks and creases. | |
|
|
|
|
||||
| test composite panel-good vac Photo by eloy avila created 6/26/2002 submitted 7/6/2002 09:45:32 PM Here is a test panel with a good vacuum. (-28 inches Mercury). Now it stays to cure. | |
|
|
|
|
||||
| test composite panel-done Photo by eloy avila created 6/26/2002 submitted 7/6/2002 09:48:35 PM Here the layers of peel ply and breather are removed from the test panel. The panel will then the post cured and cut for test samples. | |
|
|
|
|
||||
| sample wet layup Photo by eloy avila submitted 6/26/2002 Sample composite panels are layed up for testing. Here PVA mold release is applied to a non-porous surface before the wet layup to allow release of the panel after cure. | |
|
|
|
|
||||
| test composite panel-breather Photo by eloy avila submitted 6/26/2002 Here a layer of peel ply is placed on top of the test panel. This helps to create a surface for later bonding and allows excess epoxy to seep out of the carbon. | |
|
|
|
|
||||
| test composite panel-breather Photo by eloy avila submitted 6/26/2002 Here a layer of breather is applied over the peel ply before being trimmed to fit. This allows for air to evacuate and soaks up excess epoxy. It should be cut about an inch away from the vaccum bag tape. | |
|
|
|
|
||||
| test composite panel-core Photo by eloy avila submitted 6/26/2002 nomex core is placed on the wetted carbon fiber. The core should be smaller than the carbon to make a uniform panel. The vacuum tape should be a few inches away from the fiber. | |
|
|
|
|
||||
| test composite panel-epoxy Photo by eloy avila submitted 6/26/2002 Epoxy is applied to the carbon fiber. The finished panel will be cut into test samples. | |
|
|
|
|
||||
| test composite panel-vac bag Photo by eloy avila submitted 6/26/2002 Here vacuum bag has been placed to cover the enire panel and overhang on the vacumm tape. The seals should be checked for leaks and creases. | |
|
|
|
|
||||
© 2002-2008 openCortex, LLC. All Rights Reserved.