 |
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
 |
|
|
||||
 |
May 16 7:56am PDT |
|
||||||
 |
|
|||||||
 |
HOME | Login | New user? Register | Help |
 |
|
|||
|
|
|
Don't know what openCortex is? Learn about it. |
|
|
|
|||
|
|
|
|
|
|
|
|
 |
Home » test composite panel-core » test composite panel-top |
 |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PARENT CONTENT test composite panel-... |
|
|
|
||
|
|
||||||||
|
LINKED PROFILES Third Degree Burner '01 |
IMAGE
test composite panel-top OCID cn00000174 |
LINKED CATEGORIES Composite Monocoque C... Composite Shell Mater... |
||||||
|
|
||||||||
| LINKED CONTENT |
|
|
|
|
|
|
|
|
 |
 |
Link to... |
|
|||
 |
||||||
|
 |
+Article | +Photo |
 |
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
test composite panel-top Photo by eloy avila created 6/26/2002 submitted 7/6/2002 09:28:43 PM Here a top layer of carbon fiber is placed on the nomex core. The top fabric was previously wetted with epoxy. top_layer.jpg | 800 x 600 | image/pjpeg | jasari
|
|
|
|
|
|
|
|
||||
| Related Content (2) | ||||
|
||||
| test composite panel-core Photo by eloy avila created 6/26/2002 submitted 7/6/2002 09:25:21 PM nomex core is placed on the wetted carbon fiber. The core should be smaller than the carbon to make a uniform panel. The vacuum tape should be a few inches away from the fiber. | |
|
|
|
 |
||||
| test composite panel-breather Photo by eloy avila created 6/26/2002 submitted 7/6/2002 09:32:39 PM Here a layer of peel ply is placed on top of the test panel. This helps to create a surface for later bonding and allows excess epoxy to seep out of the carbon. | |
|
|
|
|
||||
| sample wet layup Photo by eloy avila submitted 6/26/2002 Sample composite panels are layed up for testing. Here PVA mold release is applied to a non-porous surface before the wet layup to allow release of the panel after cure. | |
|
|
|
|
||||
| test composite panel-breather Photo by eloy avila submitted 6/26/2002 Here a layer of peel ply is placed on top of the test panel. This helps to create a surface for later bonding and allows excess epoxy to seep out of the carbon. | |
|
|
|
|
||||
| test composite panel-core Photo by eloy avila submitted 6/26/2002 nomex core is placed on the wetted carbon fiber. The core should be smaller than the carbon to make a uniform panel. The vacuum tape should be a few inches away from the fiber. | |
|
|
|
|
||||
| test composite panel-epoxy Photo by eloy avila submitted 6/26/2002 Epoxy is applied to the carbon fiber. The finished panel will be cut into test samples. | |
|
|
|
|
||||
© 2002-2008 openCortex, LLC. All Rights Reserved.